Cleaning The Magnetic Stripe Reader; Cleaning The Printer - Fujitsu TeamPoS 7000 Series User Manual

3.1.3 Cleaning the Magnetic Stripe Reader

The read head of the magnetic card reader can become severely soiled with use. If you
continue to use a magnetic card reader with a dirty read head, the reader may fail to read
data correctly. Clean the read head at regular intervals (about once every two months).
Use a cleaning card to clean the head. Using the same procedure as that for reading a
magnetic card, slide the cleaning card through the reader four to five times for each side.
Note that the magnetic card reader is optional.
Note :
Use of the Fujitsu cleaning card (Product number D99L-1001-0060) is recommended.

3.1.4 Cleaning the Printer

Clean the printer at regular intervals (roughly about once every six months). If not kept
clean, paper debris and dust is likely to accumulate, which is likely to degrade the print
quality and/or cause paper jams.
To clean the printer, remove the printer head cover (See next page - cleaning the print head
and the roller) and remove any debris in the printer.
Do not touch the print head immediately after printing. Allow it to cool before attempting
to clean it.
Cleaning the print head and roller

Use a wet cloth with alcohol (ethyl alcohol) or a light cleaning solution which is
squeezed tightly, or just use a dry cloth. Do not allow any liquids to enter the device in
order to prevent damage occurring to the device when you use cleaning liquid and do
not use volatile materials such as thinner or benzene because such materials may
cause corrosion or remove color from the frame.
Print head
Roller
THIS DOCUMENT CONTAINS CONFIDENTIAL INFORMATION, IS PROVIDED FOR FUJITSU CUSTOMER USE ONLY,
AND IS NOT TO BE SHARED WITH ANY THIRD PARTY WITHOUT FUJITSU'S PRIOR WRITTEN CONSENT.
Page 23