Magnetic Stripe Reader (Msr) - Fujitsu TeamPoS 7000 Series User Manual

2.5.3 Magnetic Stripe Reader (MSR)

The magnetic stripe reader (MSR) reads information written on the magnetic stripe of a
magnetic card. The MSR is incorporated into each keyboard unit.
Note :
 Use only the specified MSR
 Keep magnetic stripe clean. If a magnetic stripe is contaminated with dust, oil or water,
this may cause an error, result in a magnetic head fault, or degrade the performance of the
magnetic head.
 Do not lubricate the magnetic card reader.
 If anything falls into the slot, use tweezers to remove it.
Data corruption :
Do not expose the MSR to strong magnetic fields, otherwise the data may be lost.
1. Slide a magnetic card through the slot on the right side. Hold the card lightly, and slide
it in the slot on the right side, paying attention to the direction of the arrow.
2. Move the magnetic stripe card in the direction of the arrow. Move the magnetic card
from the far end of the slot to the front.
3. Move the magnetic stripe card to the front of the slot and then remove it. When the
magnetic stripe card is read correctly, a confirmation beep sound.
THIS DOCUMENT CONTAINS CONFIDENTIAL INFORMATION, IS PROVIDED FOR FUJITSU CUSTOMER USE ONLY,
AND IS NOT TO BE SHARED WITH ANY THIRD PARTY WITHOUT FUJITSU'S PRIOR WRITTEN CONSENT.
Note :
The MSR reader may not be able to read the magnetic
stripe card correctly if the movement of the card is
stopped midway, if the card is not moved at a constant
speed, or if the card is not moved parallel to the slot.
Note :
If multiple beeps sound, retry the operation.
Page 20