Safety considerations
THIS DOCUMENT CONTAINS CONFIDENTIAL INFORMATION, IS PROVIDED FOR FUJITSU CUSTOMER USE ONLY,
AND IS NOT TO BE SHARED WITH ANY THIRD PARTY WITHOUT FUJITSU'S PRIOR WRITTEN CONSENT.
• Do not damage or modify the power cord or the interface cables.
Failure to do so may present a risk of fire or electric shock.
Do not place an object on the power cord. Do not route the power cord
where it might trip the user.
• Install and remove optional equipment only after turning off the unit
and the connected equipment and unplugging the power cord from
the wall outlet.
Failure to do so may present a risk of fire or electric shock.
• If the unit becomes unusually hot, or produces smoke or an unusual
smell, turn off the power immediately and contact the maintenance
personnel.
Failure to do so may present a risk of fire or electric shock.
• Do not attempt to modify the unit.
Failure to do so may present a risk of fire or electric shock.
• Do not use optional equipment other than those exclusively designed
for use with the unit.
Failure to do so may present a risk of fire or electric shock.
• Do not place anything containing water, such as a vase, flowerpot or
cup, or a metallic object, on or near the unit.
Failure to do so may present a risk of fire or electric shock.
• Do not use the unit with a voltage other than the specified source
voltage. Avoid connecting multiple loads to a single electrical outlet.
Failure to do so may present a risk of electric shock.
• Do not handle the power cord with wet hands.
Failure to do so may present a risk of electric shock.
• Do not use the power cable when the plug is damaged or the wall
socket is loose.
Using the power cable in such a state may present a risk of fire or
electric shock.
• Do not dispose of the unit in an incinerator or open fire.
Failure to do so may present a risk of fire and/or burns.
Preface - iv