Polaris RZR XP 1000 Owner's Manual page 137

MAINTENANCE
FILTER SYSTEMS
INTAKE PRE-FILTERS
q
The engine intake pre-filter is
located on the right side of the
w
vehicle. The clutch air intake
is located on the left side of the
vehicle.
IMPORTANT
Ensure there are no obstructions on either side of the pre-filters, including
obstructions caused by items stored in the cargo box.
Inspect the engine pre-filter before each use of the vehicle to ensure adequate
air flow. If necessary, remove the pre-filter and clean with soapy water. Dry with
low pressure compressed air.
Periodically inspect the clutch (PVT) air intake for debris and clean as needed to
ensure adequate air flow.
TIP
When washing the vehicle, always avoid spraying water directly toward the
PVT intake duct and engine air intake. See the Washing the Vehicle section for
recommended washing procedures.
135