LG A9 Series Owner's Manual page 27

3
Align and attach the center of the mop pad
with the center of the mop attachment plate.
• Attach the mop pad's velcro to the mop
attachment plate, align and attach the
centre of the mop pad with the centre of the
mop attachment plate.
4
Attach the mop nozzle to the appliance.
WARNING
• To avoid injury, do not attach the mop pad while
the mop attachment plate is rotating.
CAUTION
• Do not let the appliance stand on the floor while
the wet mop pads are attached. Doing so may
result in damage or swelling to wood flooring.
26
Adjusting the Amount of Water
Press the water adjustment buttons to adjust the
amount of water released onto the mop pad to
either High Mode or Low Mode.
• High Mode: Press the High Mode button a all
the way down to clean ingrained dirt or supply
a large amount of water.
• Low Mode: Press the Low Mode button b
all the way down to supply a small amount of
water for cleaning wood or other flooring that
can be damaged by too much water.
• STOP: Press the Low Mode or High Mode
button halfway to toggle back to the STOP
position. This stops the supply of water so you
can go over areas that are already wet.
Cleaning with the Mop Nozzle
1
Attach the water tank and mop pads to the
mop nozzle.
2
Set the water adjustment button to the STOP
position.
3
Press the Power button to start cleaning.
EN