LG A9 Series Owner's Manual page 33

4
Wash the Cyclonic Mesh Filter under running
water.
• To avoid odor, allow the Cyclonic Mesh
Filter to dry completely in a well-ventilated
area out of direct sunlight for at least 24
hours before reassembling.
5
Use the combination tool to clean out dust or
foreign objects inside the dust bin.
WARNING
• Never wash the product body with water. Water
could reach the motor and cause electric shock
or fire.
• Do not use the product body to suck up oils or
any liquids, including water.
• Do not use the appliance without the Cyclonic
Mesh Filter installed. Doing so could damage
the product.
• Do not insert fingers or sharp objects into
the motor to avoid product damage, personal
injury, or electric shock.
• Do not allow foreign objects to reach the motor
to avoid product damage, explosion or fire.
CAUTION
• Do not apply force or allow impacts to the
Cyclonic Mesh Filter. Doing so could deform
the filter, compromise product performance, or
cause the product to malfunction.
32
Cleaning the Filters
Clean the pre-filter and exhaust filter at least once
a month to maintain the optimum suction power of
the appliance.
• Clean the filters more frequently if the
appliance is used regularly or in areas with a
lot of dust.
1
Rotate the exhaust filter a to the unlocked
position b to separate it from the product
body.
2
Lift out the pre-filter c from the product body.
3
Use the combination tool d to clean any dust
off the motor.
• Do not wash the motor with water.
EN