Using The Mop Nozzle - LG A9 Series Owner's Manual

2
Remove the battery in the charging station by
pressing the button at the rear of the battery
and lifting the battery.
3
Insert the fully charged battery into the cavity
at the bottom of the handle on the product
body.
• The battery will only fit into the cavity if
aligned properly.
4
Insert the discharged battery into the auxiliary
charging station.
• The battery will only fit into the cavity if
aligned properly.
• The auxiliary charging indicator c flashes
while recharging is in progress.
• When charging is complete, the auxiliary
charging indicator c stays lit.
24

Using the Mop Nozzle

This feature is only available on some models.
Before Using the Mop Nozzle
• The mop pads only rotate at one speed
regardless of what suction power setting the
product body is set to.
• Do not use a soiled mop pad to clean floors.
• To prevent product damage, the mop
attachment plate will automatically stop if
there are foreign objects stuck in the plate or
if it is subjected to a strong impact. Turn the
appliance off immediately and remove the
foreign objects or obstructions before resuming
use.
• If you hear a noise while mopping, the mop
pad may have dropped off the mop attachment
plate. Turn off the product immediately and
reattach the mop to the attachment plate before
resuming use.
• Use only authorized LG Electronics mop pads.
• Empty the dust bin and clean the exhaust filter
and the pre-filter after using the mop nozzle.
Using the Mop Nozzle
When you attach the mop nozzle, the product will
operate initially in only mop mode with suction
OFF.
• Press the "+" button if you wish to carry out
both dust cleaning and mop cleaning at the
same time in only mop mode.
• Press the "-" button in normal mode if you wish
to use the only mop mode.
EN