Inserting/Connecting A Data Medium; Selecting The Playback Source; Adjusting The Volume/Muting - Silvercrest SPDP 18 A1 Short Manual

Switching the screen on/off
During audio playback, you can separately switch the screen on the
DVD player A and the second monitor B on or off. The sound will
still be transmitted.
Press the DISPLAY ON/OFF button
♦
screen on or off.
3)
♦ Press the TFT OFF button
monitor B on or off.

Inserting/connecting a data medium

Inserting a DVD/CD
♦ Slide the disc compartment release OPEN
DVD player A to the left and fold the screen
the disc tray.
♦ Insert the DVD/CD so that the label side is facing up and press it
carefully onto the retaining hub in the middle until the DVD/CD
clicks into place.
♦ To close the disc compartment, gently push the screen
you hear it click into place.
DVD/CD playback normally starts automatically after a few seconds.
You may need to press the PLAY/PAUSE
may appear asking you to make a selection using the navigation keys
5*
.
Connecting a USB flash drive
You can connect a USB flash drive to the USB port
video, or image files.
CAUTION
► To avoid damaging the device, do not use a USB extension
cable and do not connect the device directly to the USB port of
a computer.
► The USB port is designed for use with USB flash drives only.
Other external storage media, such as external hard drives,
cannot be operated via the USB port.
♦ Insert a USB flash drive into the USB port
the DVD player A to play files from the USB flash drive.
■ 10 │ GB │ IE
3&
to switch the DVD player A
to switch the screen on the second
q
on top of the
2!
forward to open
2!
back until
4%
button or a menu
t
to play audio,
t
on the right side of
Connecting SD/MMC memory cards
You can insert an SD/MMC memory card into the memory card slot
to play back audio, video, or image files.
♦ Insert the memory card into the memory card slot
side of the DVD player A with the contacts to the rear and the
bevelled corner at the top.

Selecting the playback source

The default playback source of the device is DVD. If other media (USB
flash drive or SD/MMC memory card) are inserted, you can switch
between the playback sources.
3*
Press the SOURCE button
♦
playback sources (DVD, USB and SD). When the DVD drive is
selected as the playback source, "DVD" or "CD" is displayed at the
top left of the screen after the data is read.

Adjusting the volume/muting

o
The main volume control , which controls the overall volume of the
u
AV OUT socket , the headphone jack
located on the side of the DVD player A . If the main volume con-
o
trol is set to minimum, no sound will be emitted or transmitted to the
second monitor B .
♦ Set the main volume control
volume range of the device.
♦ Then adjust the volume using the VOL
buttons on the remote control C or directly on the device with the
f g
VOL and VOL
DVD player A also affects the volume on the second monitor B .
♦ To adjust the volume of the second monitor B separately,
use either the volume control
2&
VOL buttons.
NOTE
f 4#
► Press the VOL ( , ) button to adjust the volume of the DVD
player A up to "16". A message will appear to warn you of
possible hearing damage at high volume. You cannot increase
the volume up to "20" until you have confirmed this message
5^
with the ENTER button
4&
♦ Press MUTE button to mute the sound on the DVD player A
and the second monitor B .
4&
♦ Press the MUTE button
y
on the right
repeatedly to switch between the
i
and the speaker
o
to maximum to maintain the full
4# 4$
and VOL
buttons. Changing the volume on the
3# 2^
or the VOL and
h
or the OK button
.
again to cancel the mute function.
SPDP 18 A1
y
2)
, is