Silvercrest SPDP 18 A1 Short Manual page 18

General Setup menu
- - General Setup Page - - - - General Setup Page - -
TV Display TV Display
Angle Mark Angle Mark
OSD Lang OSD Lang
Captions Captions
Screen Saver Screen Saver
Last Memory Last Memory
Go To General Setup Page Go To General Setup Page
TV Display
Here you can adjust the height and width of the image display on the
playback device used.
4:3 PANSCAN: Select this setting to display programs in the usual
4:3 format on a 4:3 TV. Films in 16:9 format are displayed in full
screen without the black bars, but the margins of the image are
trimmed.
4:3 LETTERBOX: Displays a film in 16:9 format on a conventional
television in 4:3 format. The image is displayed with black bars at the
bottom and top of the screen.
16:9: For displaying the picture on a widescreen TV in 16:9 format.
Angle Mark
On some DVDs certain scenes have been recorded from multiple
angles.
Select the "On" entry to switch to the next viewing angle during film
playback by pressing the ANGLE button
tion, choose the entry "Off".
OSD language
This sets the language in which the setup menu is displayed on the
screen of the DVD player A .
Captions
Here you can set whether the subtitles (if any) should be automatically
displayed on the screen each time a DVD is played. To do this, set the
function to "On". If you want to activate the subtitles manually, set this
function to "Off".
Subtitles can be adjusted during playback with the SUBTITLE button
■ 14 │ GB │ IE
16:9 16:9
Off Off
ENG ENG
Off Off
On On
On On
4(
. To deactivate this func-
Screen Saver
To activate the screen saver, set this function to "On". The screen
saver will now turn on if no input is made for about 3 minutes while
playback is paused.
To turn off the screen saver, set the function to "Off".
Last Memory
Select the "On" setting to play a disc at the last played position after
removal and re-inserting. If set to "Off", disc playback starts from the
beginning.
When the DVD player A is switched off, the stored position is not
retained.
Audio Setup menu
- - Audio Setup Page - - - - Audio Setup Page - -
Downmix Downmix
Dual Mono Dual Mono
Dynamic Dynamic
Go To Audio Setup Page Go To Audio Setup Page
Downmix
This allows you to adjust the sound settings for the AV OUT socket
LT/RT: Select this setting if you have connected the DVD player A to
a surround system.
Stereo: Select this setting when the sound is played through only two
speakers.
Dual Mono
This sets how the two-channel audio is transmitted from the
u
AV OUT socket .
Stereo: A stereo signal is transmitted via the left and right speakers or
via the AV OUT socket
L-Mono: The left mono channel is transmitted from both speakers or
u
the AV OUT socket
R-Mono: The right mono channel is transmitted from both speakers or
u
the AV OUT socket
Mix-Mono: The left and right mono channels are transmitted as a
4)
.
mono signal from both speakers or the AV OUT socket
STR STR
u
.
.
.
u
.
u
.
SPDP 18 A1