Advertisement
3
Drilling the Bracket Holes
Parts needed for this procedure:
1
Top bracket
1
Bottom bracket
1
Left bracket
4
Hook and loop fasteners (from cylinder cover)
4
Hook and loop fasteners (from hose cover)
Procedure
Figure 3
and
Figure 4
lengths of their hook and loop fasteners.
Cylinder cover
1. 8.9 cm (3-1/2 inches)
2. 22.2 cm (8-3/4 inches)
show the 2 covers and the
Figure 3
3. 15.2 cm (6 inches)
4. 22.9 cm (9 inches)
1. 15.6 cm (6-1/8 inches)
2. 10.8 cm (4-1/4 inches)
1.
Remove the existing hydraulic cover
Retain the bolts.
g323225
1. Bolt—5/16 x 1-1/4 inch (2)
3
Figure 4
Hose cover
3. 13.3 cm (5-1/4 inches)
4. 8.9 cm (3-1/2 inches)
(Figure
Figure 5
2. Existing hydraulic cover
g323226
5).
g309727
Advertisement
