Advertisement
Figure 18
1. Bolt—5/16 x 1-1/4 inches
(12)
2. Clamp plate (2)
3. Shield (2)
5.
Using the clamp plate and guard mount as a
template, drill a hole (5/16 inch diameter) into
both shields
(Figure
Figure 19
1. Drill a hole (5/16 inch diameter) here.
6.
Install a bolt and nut in both holes.
4. Guard mount
5. Locknut—5/16 inch (12)
19).
g309637
g309636
8
Advertisement
