Removing The Machine From The Shipping Container; Installing The Rear Tires - Toro Groundsmaster 3300 Operator's Manual

Procedure
13
14
15
16
17
18
1
Removing the Machine from
the Shipping Container
Models 31900, 31901, and 31907
Only
No Parts Required
Procedure
1. Remove the screws that hold down the
rear-wheel hubs to the pallet.
2. Cut the cable tie that holds the driveshaft to the
rear wheels.
3. Remove the rear wheels from the shipping skid.
4. Raise the roll bar; refer to
(page 38).
5. Connect a hoist to the top, center area of the roll
bar and raise the machine.
6. Remove the shipping skid from the bottom area
of the machine.
7. Position 2 jack stands under the rear area of
the machine shown in
Machine (page 49).
Description
Optional attachment (ordered
separately; refer to your authorized Toro
distributor)
Socket-head screw (3/8 inch)
Washer (3/8 inch)
Flange locknut (3/8 inch)
No parts required
No parts required
CE Kit (ordered separately; refer to your
authorized Toro distributor)
Weight—19 kg (42 lb) [amount varies
per your model]
Weight—6 kg (15 lb) [amount varies per
your model]
Weight Bracket Kit (if necessary)
Weight—11 kg (25 lb) [amount varies
per your model]
No parts required
Raising the Roll Bar
Raising the Rear of the
Qty.
1
Install the attachment.
2
2
2
–
Check the fluid levels.
–
Check the tire pressure.
Installing the CE Kit (for use in
1
CE-compliant countries).
Add rear weight (if necessary).
1
Adjust the weight-transfer pressure (if
–
needed).
8. Lower the machine on the jack stands.
2

Installing the Rear Tires

Models 31900, 31901, and 31907
Only
Parts needed for this procedure:
2 Rear wheel
2 Small washer (2-wheel-drive only)
2 Large washer (2-wheel-drive only)
2 Bolt (5/8 x 1-1/4 inch) (2-wheel-drive only)
2 Dust cap (2-wheel-drive only)
8 Lug nut (4-wheel-drive only)
Thread-locking compound
Procedure
1. Remove the shipping bracket from the axle
spindle or wheel hub and discard the bracket.
2. Remove the tires from the shipping container
and retain the 2 bolts (5/8 x 1-1/4 inch) and large
washers that secured the tires to the container.
12
Use