HP E840 A Series User And Service Manual page 32

Rack Rear
Stationary Section
Figure 2-8. Removing the Rack Slide Chassis Section from the Intermediate Section.
Rack Front
m5x12 flat head screws
(Standard Adapter Kit)
32 Rack Mounting and Option Installation
5. Remove the chassis section from the intermediate section (Figure
2-8). (The chassis section will be connected to the mainframe in Step
7.) Slide the intermediate section back into the stationary section.
(Right Rack Slide Shown)
6. Attach the stationary section to the rack's front inside rail through the
channel nuts. Use two m5x12 flat head screws. Attach the stationary
section to the rear inside rail using two m5x12 pan-head screws
(Figure 2-9).
Mounting Holes When Using
the VXI Plug&Play Compliant Adapters
(Left Rack Slide Shown)
Figure 2-9. Installing the Rack Slide Stationary Sections.
Depress From Back
Rack Front
Side To Remove
Stationary Section Chassis Section
Rack Rear
m5x12 Pan Head Screws
(Standard Adapter Kit)
Chapter 2