Removing The Mainframe Cover - HP E840 A Series User And Service Manual

Removing the
Mainframe Cover
46 Servicing Your Mainframe
1. Turn off the mainframe and remove the power cord.
2. Remove the rear panel. Refer to "Removing the Rear Panel from the
Mainframe" on page 45 for instructions.
3. Remove the mainframe cover by removing the ten m3x6 flat head
torx screws (five on each side of the mainframe). Refer to Figure 3-3.
Figure 3-2. Removing the Mainframe Cover
Remove 5 screws from each side.
Chapter 3