Maintenance and repairs
5.2 Cleaning and caring for the device
5.2.4
Working with stainless steel surfaces
Cleaning guidelines
Further information on stainless steel surfaces:
• The surface should be properly ventilated.
• Keep the surface clean. Remove cleaning agents and foodstuff residues immediately.
Ensure that foodstuff splatters are not returned back in the production process.
• If mechanical cleaning is necessary, do not use any metallic cleaning devices or aids for
this.
– Clean with brushes made of plastic or natural bristles or with microfiber pads.
– Use plenty of water to clean the surface.
• Make sure surface is not damaged: Do not damage the device during operation, or by
cleaning or repairing it using hard tools, in particular tools made of corrodible materials.
• Ensure that the surface does not come into contact with parts that can rust.
This includes water pipes, filings, residue from wire brushes or steel wool. These can
cause rust film and/or rust spots on stainless steel surfaces.
– Remove any stains or rust immediately.
– Remove new rust spots with a mild abrasive detergent in order to prevent any further
– Rinse thoroughly with clean water after each cleaning.
• Ensure that the cleaning agent is completely removed without any residue.
42
corrosion.
Unified Comfort Panels Hygienic
Compact Operating Instructions, 04/2023, A5E52219907-AA