1.4
Interfaces
The figure below shows the interfaces of the HMI devices using the interface plate of devices
with display diagonal ≥15" as an example.
①
②
③
④
⑤
For devices with display diagonal ≤12 ", there is another threaded hole above the
"Maintenance" button for fixing the strain relief plate.
1.5
Accessories
An accessory kit with required accessories is included with the HMI device.
Note
This section contains a selection of accessories that is suitable for your HMI device. You can
find additional variants of this selection and the complete accessories portfolio for HMI
devices in the Industry Mall on the Internet
(https://mall.industry.siemens.com/mall/en/WW/Catalog/Products/10144445). Details such as
the delivery quantity and technical specifications of accessories can be found in the Industry
Mall under the respective article numbers.
You can find an overview of the status and compatibility of the accessories portfolio in the
"Cross-list" on the Internet (https://support.industry.siemens.com/cs/ww/en/view/40466415).
Unified Comfort Panels Hygienic
Compact Operating Instructions, 04/2023, A5E52219907-AA
X80 power supply connector
Connection for functional ground
X20 RS422/485 (SUB-D)
X2 PROFINET (LAN), 10/100/1000 Mbit
B1 button "Maintenance"
⑥
X1 PROFINET (LAN), 10/100 Mbit
⑦
X61 USB
⑧
X62 USB
⑨
X63 USB
⑩
X64 USB
Overview
1.4 Interfaces
11