A.2
Troubleshooting
This section contains information on localizing and rectifying possible faults.
Error message
"Reset system memory card
failed"
"Start automatic backup failed"
"System card error"
A.3
Application examples and FAQs
Application examples
You can find application examples on the Internet at the following address:
Application Examples Unified Comfort Panels
(https://support.industry.siemens.com/cs/ww/en/ps/26032/ae).
FAQs
Frequently asked questions on Unified Comfort Panels are available on the Internet at the
following address: FAQs Unified Comfort Panels
(https://support.industry.siemens.com/cs/ww/en/ps/26032/faq)
Unified Comfort Panels Hygienic
Compact Operating Instructions, 04/2023, A5E52219907-AA
Possible cause
Remedy
System memory card is
Replace the defective system memory
defective or wrong
card with a new SIMATIC SD memory card
system memory card is
≥ 32 GB.
inserted.
The system memory
Replace the system memory card with the
card from a device of a
system memory card of a device of the
different type has been
same type.
inserted.
You can use the system memory card
with the device without using the data of
the system memory card. In this case, all
the data in the
"\System Card\SIMATIC.HMI\Active" folder
will be deleted.
Technical Support
A.2 Troubleshooting
65