Siemens MTP700 Unified Comfort Hygienic Compact Operating Instructions page 47

ATEX/UKEX/IECEx approval
Notes on use in hazardous areas
Observe the following FAQ regarding the use of an HMI device in hazardous areas:
FAQ 291285 (https://support.industry.siemens.com/cs/ww/en/view/291285)
When using the device in hazardous areas, ensure that all plugs connected to the device are
secured in a captive manner, see section "Securing cables for use in hazardous areas
(Page 35)".
You can find more information about explosion protection, EU/UK Declarations of Conformity
and other certificates on the Internet at the following address:
Unified Comfort Panels certificates
(https://support.industry.siemens.com/cs/ww/en/ps/26032/cert)
ATEX/UKEX approval
For an HMI device with "Ex" marking, the following approvals apply according to the
following standards.
• Standards:
– EN IEC 60079-0
– EN IEC 60079-7
– EN 60079-31
• Approvals:
IECEx approval
For an HMI device with "IECEx" marking, the following approvals apply according to the
following standards.
• Standards:
– IEC 60079-0
– IEC 60079-7
– IEC 60079-31
• Approvals:
Unified Comfort Panels Hygienic
Compact Operating Instructions, 04/2023, A5E52219907-AA
II 3 G Ex ec IIC T4 Gc
II 3 D Ex tc IIIC Dc
Ex ec IIC T4 Gc
Ex tc IIIC Dc
Technical specifications
6.2 Labels, certificates and approvals
47