Siemens SITRANS LG240 Operating Instructions Manual page 35

Current output 2
Display
Menu language
Displayed value 1
PBD-51041037
With active PIN, only the following adjustment functions are possible
without entering a PIN:
•
Select menu items and show data
•
Read data from the sensor into the display and adjustment module
Caution:
When the PIN is active, adjustment via PACTware/DTM as well as
other systems is also blocked.
In delivery status, the PIN is 0000.
Call our service department if you have modified and forgotten the
PIN.
If a supplementary electronics with an additional current output is in-
stalled in the instrument, you can adjust the additional current output
separately.
In menu item"Current output 2" you specify which measured value the
additional current output refers to.
The procedure corresponds to the previous settings of the standard
current output. See "Setup - Current output".
6.4.2 Display
In the main menu point "Display", the individual submenu points
should be selected one after the other and provided with the correct
parameters to ensure the optimum adjustment of the display options.
The procedure is described in the following.
The following submenu points are available:
The submenu points are described below.
This menu item enables the setting of the requested national lan-
guage.
In delivery status, the sensor is set to English.
In this menu item, you define the indication of the measured value
on the display. You can display two different measured values. In this
menu item, you define measured value 1.
SITRANS LG240 - Operating Instructions
35