Electrical Connections; Handling And Operation; Switching On And Off - Silvercrest SLB 450 A2 Operating Instructions Manual

Electrical connections

GB
IE

Handling and operation

Switching On and Off
12
DANGER
Risk of fatal electrocution!
Contact with wires or components carrying mains power could
be potentially fatal!
Observe the following safety notices to avoid risks from electrical hazards:
► Do not operate the appliance if the power cable or the plug are damaged.
► Connect the appliance only to an electrical outlet protected by an FC
protector switch (RCD) with a rated residual current not exceeding 30 mA.
► Never touch the pump and the mains plug with wet hands.
► Avoid water contact with the pump.
► Place the pump at least 60 cm away from the bath tub.
► Under no circumstances should you open the housing of the appliance.
Should live connections be touched and/or the electrical and mechanical
construction changed, there is a risk of receiving an electric shock.
♦ Insert the plug into a mains power socket.
In this chapter you receive important information for the handling and operation
of the appliance.
♦ Switch the pump
pump.
♦ Switch the pump
pump.
NOTICE
► In the same way, the pump may be switched on or off using the remote
9
control by pressing the function button
Handling and operation
on with one press of the function button
off with several presses of the function button
10
3
on the
3
.
SLB 450 A2
on the