Table of Contents
Advertisement
Installing the Battery
1.
Install the battery as shown in
Figure 39
2.
Connect the battery cables; refer to
the Battery (page
Figure
39.
Connecting
39).
Connecting the Battery
Connect the battery as shown in
Charging the Battery
WARNING
Charging the battery produces gasses that
can explode.
Never smoke near the battery and keep sparks
and flames away from battery.
Important:
Always keep the battery fully charged.
This is especially important to prevent battery
damage when the temperature is below 0°C (32°F).
1.
Remove the battery from the machine; refer to
Removing the Battery (page
2.
Connect a 3 to 4 A battery charger to the battery
posts. Charge the battery at a rate of 3 to 4 A
for 4 to 8 hours (12 V).
Note:
Do not overcharge the battery.
3.
Install the battery; refer to
(page
39).
g409056
Storing the Battery
If you store the machine for more than 30 days,
remove the battery and charge it fully. Either store
it on the shelf or on the machine. Leave the cables
disconnected if it is stored on the machine. Store
the battery in a cool atmosphere to avoid quick
deterioration of the charge in the battery. To prevent
the battery from freezing, make sure it is fully charged.
39
Figure
40.
Figure 40
38).
Installing the Battery
g409012
Advertisement
Table of Contents
