Settings in the local stations
Connect the engineering tool to the CPU modules of the local stations (station number 1 and station number 2) and set
parameters for each of them.
1.
Set the CPU module and add a module label of the CPU module. The setting method of the CPU module and addition
method of the module label are the same as those of the master station. (Page 90 Setting in the master station)
2.
Set the RJ71GN11-SX as follows.
[Navigation window] [Parameter] [Module Information] Right-click [Add New Module]
3.
Add the module labels of the RJ71GN11-SX. The addition method of the module label is the same as that of the master
station. (Page 90 Setting in the master station)
4.
Set the items in "Required Settings" for the local station (station number 1) as follows. For the local station (station
number 2), set 2 for "Station No." and 192.168.3.2 for "IP Address".
[Navigation window] [Parameter] [Module Information] [RJ71GN11-SX] [Required Settings]
8 COMMUNICATION EXAMPLES
94
8.2 RJ71GN11-SX Communication Example