Retractable-Camera Assembly; Removing The Retractable-Camera Assembly - Dell Inspiron 24 5420 Owner's Manual

Next steps
1. Install the system-board
2. Install the I/O cover.
3. Install the back cover.
4. Install the stand.
5. Follow the procedure in

Retractable-camera assembly

Removing the retractable-camera assembly

Prerequisites
1. Follow the procedure in
2. Remove the stand.
3. Remove the back cover.
4. Remove the I/O cover.
5. Remove the system-board
About this task
The following image indicates the location of the retractable-camera assembly and provides a visual representation of the
removal procedure.
Steps
1. Disconnect the camera cable from the system board.
2. Peel the tape that secures the camera cable to the display-assembly base.
3. Remove the two screws (M3x5) that secure the retractable-camera assembly to the display-assembly base.
4. Remove the retractable-camera assembly from the display-assembly base.
66 Removing and installing Customer Replaceable Units (CRUs)
shield.
After working inside your
Before working inside your
shield.
computer.
computer.