Retractable-Camera Assembly; Removing The Retractable-Camera Assembly - Dell Inspiron 24 5415 Service Manual

Steps
1. Ensure that the thermal pad covering the M.2 2280 slot on the system board is in place.
2. Align the notch on the solid-state drive with the tab on the M.2 card slot.
3. Slide the solid-state drive into the M.2 card slot on the system board.
4. Replace the screw (M2x3.5) that secures the solid-state drive to the system board.
Next steps
1. Install the system-board
2. Install the I/O cover.
3. Install the back cover.
4. Install the stand.
5. Follow the procedure in

Retractable-camera assembly

Removing the retractable-camera assembly

Prerequisites
1. Follow the procedure in
2. Remove the stand.
3. Remove the back cover.
4. Remove the I/O cover.
5. Remove the system-board
About this task
The following image indicates the location of the retractable-camera assembly and provides a visual representation of the
removal procedure.
34 Removing and installing components
shield.
After working inside your
Before working inside your
shield.
computer.
computer.