Installing The Primary Memory; Removing Wireless Wide Area Network (Wwan) Card (Optional) - Dell P29E Owner's Manual

Hide thumbs Also See for P29E:
Table of Contents

Advertisement

a.
battery cover
b.
battery
c.
base cover
3.
Perform the following steps to remove the primary memory:
a. Pry the retention clips away from the primary memory until it pops up.
b. Lift the primary memory and remove it from the computer.

Installing the primary memory

1.
Insert the primary memory into the memory socket.
NOTE: Install either two or four memory modules in the memory module slots to ensure optimum system
performance. Installing one or three memory modules lead to system performance issues.
2.
Press the clips to secure the primary memory to the system board.
3.
Install the:
a.
base cover
b.
battery
c.
battery cover
4.
Follow the procedure in

Removing Wireless Wide Area Network (WWAN) card (Optional)

1.
Follow the procedure in
2.
Remove the:
a.
battery cover
b.
battery
c.
base cover
3.
Please perform the following steps to remove the WWAN card:
a. Disconnect and remove the antenna cables connected to the WWAN card.
b. Remove the screw that secures the WWAN card to the computer.
c. Remove the WWAN card from the computer.
16
After working inside your
computer.
Before working inside your
computer.

Advertisement

Table of Contents
loading

Table of Contents