Installing The Display Bezel; Removing The Camera - Dell P29E Owner's Manual

Installing the display bezel

NOTE: The display bezel is available only for non touch systems.
1. Place the display bezel on the display assembly.
2. Press the edges of the display bezel until it clicks onto the display assembly.
3. Install the:
a. display assembly
b. palmrest
c. keyboard
d. hard drive
e. base cover
f. battery
g. battery cover
4. Follow the procedure in

Removing the camera

1. Follow the procedure in
2. Remove the:
a. battery cover
b. battery
c. base cover
d. hard drive
e. keyboard
f. palmrest
g. display assembly
h. display bezel
3. Perform the following steps as shown in the illustration.
a. Disconnect the camera cable from the computer [1].
b. Remove the camera module from the computer [2].
30
After working inside your computer.
Before working inside your computer.