Installing the WWAN card (Optional)
1.
Slide the WWAN card to the WWAN card slot.
2.
Tighten the screw to secure the WWAN card to the computer.
3.
Route the antenna cables through the routing channels and connect them to the WWAN card.
4.
Install the:
a.
base cover
b.
battery
c.
battery cover
5.
Follow the procedure in
Removing the Wireless Local Area Network (WLAN) card
1.
Follow the procedure in
2.
Remove the:
a.
battery cover
b.
battery
c.
base cover
3.
Perform the following steps to remove the WLAN card from the computer:
a. Remove the screw that secures the WLAN card to the computer.
b. Remove the shield that secure the antenna cables.
c. Disconnect and un-route the antenna cables connected to the WLAN card and remove the WLAN card from the computer.
After working inside your computer
Before working inside your
computer.
17