Download Print this page

Hitachi SJ-PB2 Instruction Manual page 7

Profibus-dp communication board for sj700/sj300/l300p series inverter

Advertisement

CHAPTER 1
INTRODUCTION
1.5 Profibus-DP Supported Version
1.5.1 In case of SJ300/L300P Series
SJ-PB2/SJ-PBT2 can use following Manufacturing number (MFG No) of SJ700/SJ300/L300P series.
After Manufacturing number : XX8KXXXXXXXXXXXX (SJ300-0.4-55kW / L300P-11-75kW supported)
XXEMXXXXXXXXXXXX (SJ300-75-132kW / L300P-90-132kW supported)
(Note) Manufacturing number is written in specifications label on main body of SJ300/L300Pseries. Refer to
figure 1-2, figure 1-3.
(Figure1-2, 1-3 are the example of SJ300 series. L300P series are the same manner as SJ300 series.)
Specifications label
Figure 1-2 Position of specifications label
Inverter model
Maximum applicable motor
Input ratings
Output ratings
Manufacturing number
118KT12345 10001
0101
Figure 1-3 Contents of specifications label
1.5.2 In case of SJ700 Series
It is possible to use all the SJ700 Series for SJ-PB2/SJ-PBT2.
3

Advertisement

loading

This manual is also suitable for:

Sj-pbt2