Cleaning and maintenance
Cleaning the shaver in the SmartClean system
-
SmartClean system Pro also has two phases: the rinsing phase and the
drying phase. It also has a progress bar to show the progress of the
two phases.
Preparing the SmartClean system for use
Do not tilt the SmartClean to prevent leakage.
Note: Hold the SmartClean while you prepare it for use.
1
Put the small plug in the back of the SmartClean system.
2
Put the adapter in the wall socket.
3
Press the button on the side of the SmartClean system (1) and lift
the top part of the SmartClean system (2).
4
Pull the seal off the cleaning cartridge.
5
Place the cleaning cartridge in the SmartClean system.
ENGLISH
13
13