Philips S9711/33 Manual page 14

ENGLISH
14
14
6 Push the top part of the SmartClean system back down ('click').
Using the SmartClean system
Always make sure to shake excess water off the shaver before you place
it in the SmartClean.
1 Press the top cap to be able to place the shaver in the holder ('click').
2 Hold the shaver upside down above the holder. Make sure the front
of the shaver points towards the SmartClean system.
3 Place the shaver in the holder (1), tilt the shaver backwards (2) and
press down the top cap to connect the shaver ('click') (3).
The battery symbol and the on/off button start to flash, which
,
indicates that the shaver is charging.
4 Press the on/off button on the SmartClean system to start the
cleaning program.