9
Installing the Washer Fluid
Hoses
Parts needed for this procedure:
1
Female-hose fitting
1
Male-hose fitting
Procedure
Note:
The hoses are extra long and need to be cut
to install the connections.
1.
Route the hoses along the frame and back to
the washer-fluid tank
2.
Install the hose to the washer-fluid tank as
shown in
Figure
Figure 27
1. Washer-fluid tank
3.
Install the hose to the tank.
4.
Cut the hose at the location shown in
5.
Install the fitings as shown in
(Figure
28).
27.
2. Washer-fluid hose
Figure
Figure
28.
1. Cut the hose here.
2. Hose end
3. Female fitting
6.
Secure the hose with plastic ties
10
Connecting the Wire
Harness
Parts needed for this procedure:
1
Fuse (10 A)
g301599
Procedure
1.
Route the wire harness along the machine frame
(Figure
29).
28.
19
Figure 28
4. Male fitting
5. Plastic ties
(Figure
g301541
28).