Toro Groundsmaster 3200 Series Operator's Manual page 6

1. Nut
2. Mower-deck latch
7. Remove the nuts and bolts from the right armrest
and fold it to the center
1. Bolt
8. Tilt the steering column to its lowest position;
refer to the Operators Manual.
9. Remove the R-clamps from the roll bar securing
the vent tubes (Figure
10. Lay the vent tubes out of the way for mounting
the cab.
11. Install the R-clamps back into the roll bar without
the vent tubes (Figure
Figure 4
3. Bolt
(Figure 5).
Figure 5
2. Locknut
6).
6).
g302034
1. Bolt
2. Fuel-vent tube
g301595
6
Figure 6
3. R-clamp
g301597