Husqvarna AUTOMOWER 430X Operator's Manual page 24

For more information about the operating modes
Start, Park and Pause , see Operation on page
35 .
3.9.2.2 Map
The map shows the current position of the
product and the set centerpoint (origin) for
GeoFence.
3.9.2.3 Settings in Automower
The product has factory settings but
the settings can be adapted to each
work area.
Most of the settings in the Automower
Connect app can be set in the display
of the product. Refer to
product settings on page 24 . Some of
the settings can only be set in
®
Bluetooth short-range distance
because of security.
3.9.2.4 Messages
In this menu the previous fault and information
messages can be found. For some of the
messages, there are tips and advice to help to
rectify the fault.
Note: The Messages menu is only available for
®
Bluetooth short-range connectivity.
3.10 To do the product settings
The product has factory settings but the settings
can be adapted to each work area.
24 - Installation
3.10.1 To get access to the menu
1.
2.
3.
3.10.2 To do the timer settings
3.10.2.1 To calculate the timer setting
1.
2.
3.
Note: The operation capacity is approximate and
timer settings can be adjusted.
®
Connect
Model
Automower
®
Automower
To do the
Automower
Automower
Example: A lawn of 500 m
Automower
500 m
600 yd
Days /
week
7
3.10.2.2 To set the timer
1.
2.
Push the STOP button.
Enter the PIN code on the keypad.
Push the MENU button.
Calculate the dimension of your lawn in m
2
yd .
2 2
Divide the m / yd of the lawn with the
approximate operation capacity. Refer to
table below.
The result is equal to the number of hours
that the product must operate each day.
Approximate operation
capacity, m
®
420 90 / 107
®
430X 135 / 161
®
440 165 / 197
®
450X 205 / 245
2
/ 600 yd
®
420.
2
/ 90 ≈ 5.5
2
/ 107 ≈ 5.5
h / day Timer settings
5.5 07:00 - 12:30 / 07:00
am - 12:30 pm
To get access to the menu
Do steps 1–3 in
on page 24 .
Use the arrow buttons and the OK button to
move through the menu structure
Overview Timer settings .
1201 - 001 - 05.06.2019
2
/
2 2
/h / yd /h
2
, cut with a
Timer >