Husqvarna AUTOMOWER 430X Operator's Manual page 46

6.3 Information messages
The list below shows a number of information messages that may be found in the
®
the Automower Connect app. Contact your local Husqvarna representative if the same message
appears often.
Message Cause
Low battery
The product cannot find the charging
station.
The guide wire is broken or not connec-
ted.
The battery is spent.
The charging station's antenna is de-
fective.
Settings restored
Confirmation that a
tings has been carried out.
Limited cutting
The maximum and minimum position of
height range
the cutting height adjustment is limited.
Unexpected cut- The cutting height adjustment is altered
ting height adj
without a request from the product.
Cutting system im-
The product has discovered vibrations
balance
in the cutting disc.
46 - Troubleshooting
Action
Check that the charging station and the
guide wire are installed in accordance
with the instructions. Refer to
the installation of the product on page
16 .
Find out where the break is and rectify
it.
Replace the battery. Refer to
on page 39 .
Check if the indicator lamp in the
charging station flashes red. Refer to
LED indicator lamp on the charging sta-
tion on page 48 .
Reset all user set-
This is normal. No action required.
Check that no grass or other objects
are blocking the blade disc from mov-
ing up or down.
Carry out a cutting height calibration.
Contact your local Husqvarna repre-
sentative.
Carry out a cutting height calibration.
Contact your local Husqvarna repre-
sentative.
Verify that the blades and screws are
intact and not worn out. Verify that all
blades are correctly mounted. Check
that no double blades are mounted on
any of the three blade positions.
Messages menu in
Before
Battery
1201 - 001 - 05.06.2019