LG CBIZ2435B Owner's Manual page 13

Any alterations must only be made by a qualified
electrician.
If the total number of heating units of the
appliance you choose is not less than 4, the
appliance can be connected directly to the mains
by single-phase electric connection, as shown
below.
• If the power cord is damaged or needs to be
replaced, contact an LG Electronics Customer
Information Centre.
• The installer must ensure that the correct
electrical connection has been made and that it
is compliant with safety regulations.
• If the appliance is being connected directly to the
mains an omnipolar circuit-breaker must be
installed with a minimum opening of 3 mm
between contacts.
• The power cord must not be bent or
compressed.
• The power cord must be checked regularly and
replaced by authorised technicians only.
WARNING
• Make sure that the bottom surface and the
power cord of the hob do not come into contact.
INSTALLATION
13