LG CBIZ2435B Owner's Manual page 17

2
Place suitable cookware on the cooking zone
that you wish to use.
• Make sure the bottom of the cookware and
the surface of the cooking zone are clean
and dry.
3
Press and slide the power control, the power
setting display corresponding to the button
will flash.
Select a power setting by pressing the power
control.
• If you don't choose a power setting within 1
minute, the induction hob will automatically
switch off. You will need to start again at step
1.
• You can modify the power setting at any
time during cooking by repeating of this
step.
NOTE
• If the display flashes "u" with the power setting,
this means that:
- you have not placed cookware on the correct
cooking zone or,
- the cookware you're using is not suitable for
induction cooking or,
- the cookware is too small or not properly
centered on the cooking zone.
• No heating takes place unless there is suitable
cookware on the cooking zone.
• The display will automatically turn off after 1
minute if no suitable cookware is placed on it.
Power Settings
The settings below are guidelines only. The exact
setting will depend on several factors, including
your cookware and the amount you are cooking.
Experiment with the induction hob to find the
settings that best suit you.
Power
setting
1 - 2 • Delicate warming for small
amounts of food
• Melting chocolate, butter, and
foods that burn quickly
• Gentle simmering
• Slow warming
3 - 5 • Reheating
• Rapid simmering
• Cooking rice
6 - 11 • Pancakes
12 - 14 • Sautéing
• Cooking pasta
15 • Stir-frying
• Searing
• Bringing soup to the boil
• Boiling water
B • Bringing soup to the boil quickly
• Boiling water quickly
Finish Cooking
1
Press the power control that you wish to switch
off. Turn the cooking zone off by pressing or
sliding the slider to "0". Make sure the display
shows "0".
OPERATION
17
Suitability