Husqvarna BMS 280P Operator's Manual page 11

To operate the product
1. Operate the movement controls to move the product.
A
B
.
a) To move the product forward, push the
movement controls (A and B) forward.
b) To move the product rearward, pull the
movement controls (A and B) rearward.
c) To turn to the right, push the left movement
control (B) forward.
d) To turn to the left, push the right movement
control (A) forward.
e) To turn clockwise around the product axis, push
the left movement control (B) forward and pull
the right movement control (A) rearward.
f) To turn counterclockwise around the product
axis, push the right movement control (A) forward
and pull the left movement control (B) rearward.
2. Adjust the speed with the movement controls (A) and
(B).
a) Push or pull the movement controls a small
distance for slow speed.
b) Push or pull the movement controls a long
distance for high speed.
1998 - 001 - 03.07.2023
To adjust the angle of the tool
• Operate the tool angle handle (C) to adjust the angle
of the tool.
C
B
A
Note:
The tool angle handle controls the hydraulic
piston (B) and the angle of the tool holder (A).
To adjust the height of the tool
1. Remove the pin (A).
B
2. Pull out the rod (B).
3. Move the cutting head (C) to the correct position.
4. Install the rod (B).
5. Install the pin (A).
To adjust the engine speed
The throttle control adjusts the engine speed and the
speed of the tool.
A
C
11