Husqvarna BMS 280P Operator's Manual page 23

2. Attach the lifting equipment at the lifting eyes (A).
A
Note:
There are 2 lifting eyes at each side and 2
lifting eyes at the back of the product.
3. Lift the product slowly.
4. To lift the product with a forklift, put the forklift blades
through the brackets (B).
To attach the product to a
transportation vehicle
1. Put wheel chocks at the wheels to prevent
movement during transportation.
2. Attach tie-down straps to the lifting eyes.
3. Attach and tighten the tie-down straps to the
transportation vehicle.
4. Make sure that the product cannot move.
1998 - 001 - 03.07.2023
A
B
To install the front wheel dolly to the
product
1. Put the front wheel dolly (A) in front of the product.
A
2. Remove the bolt (B) and the large washer (C).
3. Install the front wheel dolly (A) to the product.
A
4. Install the bolt and washers and tighten the bolt.
Storage
CAUTION:
storage outdoors. Always keep the product
indoors.
WARNING:
parked safely.
• Keep the product in a dry and frost free area.
C
B
B
Do not put the product in
The product must be
23