Fujitsu D2509 Technical Manual page 14

Overview
Internal connectors
– 1 floppy disk connector (34 pin)
– 1 IDE primary
– 6 Serial ATA
2
– I C signaling connector
– SAS activity connector (HD LED)
– ATX power connector 24 pin (12V, -12V, 5V, 3.3V and 5V auxiliary)
– ATX power connector 8 pin (2x 12V)
– ATX power connector 4 pin (1x 12V)
– PC98 connector
– front panel
– dual USB type C (for USB port on front side)
– 2 USB connectors for optical drives
– 1 USB connector for internal USB stick
– 3 connectors for system fans (4 pin)
– 1 connector for system fan (5 pin)
– intrusion connector
– 1 RAID key
External connectors
– 2 serial ports (COM1, COM2)
– 1 parallel port (optional)
– 2 PS/2 interfaces for keyboard and mouse
– 2 USB 2.0 ports with 480 Mbits/s (rear side)
– 1 VGA port
– 2 RJ45 LAN ports
PCI slots
– 2 x PCI-X slots(64 bit / 133 MHz IOOP
– 4 x PCI-Express slots, Gen1, mechanical PCIe x8; the slots can be switched
in different ways:
– 4x PCIe x4 slots (standard)
or
– 2x PCIe x4 slots and 1x PCIe x8 slot (optional)
or
– 2x PCIe x8 slots (optional)
– 1 x PCI slot 32 bit / 33 MHz)
14
TM
)
Technical Manual
Features
D2509 (TX200 S4)