Fujitsu D2509 Technical Manual page 23

Features
The LEDs have the following meaning:
LED
A - Identification blue
B - CSS
(Customer Self
Service)
C - GEL
(Global Error
LED)
D1 - board
D2 - board
D3 - board
D4 - board
E - memory
F - system
fans
G - CPU fans
H - PCI card
D2509 (TX200 S4)
Indicator Meaning
server is identified via ServerView
yellow indicates a prefailure
yellow flashing indicates a failure
orange indicates a prefailure
orange flashing indicates a failure. Reasons for a failure
may be:
- overheating of one of the sensors
- sensor defect
- fan defect
- CPU error
- Software detected an error
yellow aux. voltage available
green system running
red configuration error. The system board will
be held in reset.
Possible configuration errors are e.g.: old
CPU populated, CPUs with different FSB
requirements populated, CPU1 not
populated
green flashing iRMC - server management controller is
ok
off iRMC not alive
off memory module running
orange memory module failure
off fan running
orange fan failure
off fan running
orange fan failure
off PCI card okay
orange PCI card failure
Technical Manual
LEDs
23