2. Windows: Double-click "SHMirrorOp_Win.exe" in the Autoplay screen.
If the Autoplay screen does not appear, open the wireless token and double-click "SHMirrorOp_Win.exe".
Mac: Open the wireless token and double-click "SHMirrorOp_Mac.app".
The connection software starts.
3. Click "
", select the wireless board to be connected, and click "CONNECT".
The host name of the wireless board is shown in the home screen of Wireless mode.
4. Enter the passcode and click "OK".
The passcode is shown in the home screen of Wireless mode.
The computer connects to the wireless board.
n Starting from the installed/downloaded software
1. Double-click "MirrorOp for SHARP".
The connection software starts.
2. Click "
", select the wireless board to be connected, and click "CONNECT".
The host name of the wireless board is shown in the home screen of Wireless mode.
3. Enter the passcode and click "OK".
The passcode is shown in the home screen of Wireless mode.
The computer connects to the wireless board.
TIPS
• The passcode changes for security.
You can change the settings to make the passcode permanent, or connect without entering the passcode. (See page 28.)
14
E