Table of Contents
Advertisement
SNMP Setup
SNMP V3
OSD Setup
Display
Option
Projection
Option
WebSlides
Auto Refresh
Setup
Interval
(second)
Access
Password
Control
Change
Conference
Passwords
Control
Admin
Reset to Default
Firmware
System
Upgrade
Configuration
Firmware
Upgrade
Reboot System
Enable / Disable
Set whether SNMP is enabled or disabled.
Username
Set the user name for SNMP.
Auth Password (MD5) / Priv Password (DES)
Set each password.
Trap Destination
Set the trap destination.
Device Information / User-List (touch-applicable models only) / Connect info
Set whether each type of information is shown in the screen.
Font color / Font Size
Set the color and size of the screen font.
Screen Saver Settings (touch-applicable models only)
Set whether a screen saver is used.
If used, set the time until the screen saver activates.
OSD Menu Button (touch-applicable models only)
Set whether the toolbar is displayed.
Set the refresh interval for the screen displayed in the web browser.
Set the password for display of the screen in a web browser.
Disable: Do not use a password.
Use the same password as "Code": Use the same password as the passcode.
Use the following Code: Use the entered number as the password.
Change the password for Conference Control.
Change the password for Admin.
Return the wireless board settings to their factory default state.
Export: You can save the settings.
Import: You can retrieve saved settings.
Update the firmware of the wireless board.
You can download the latest version of the firmware using the Information Display Downloader
on the CD-ROM.
Restart the wireless board.
31
E
Advertisement
Table of Contents
