Table of Contents
Advertisement
In the home screen that appears on the monitor in Wireless mode, you can select computers to be connected and set various
functions.
1
1. Shows how to connect to the wireless board.
2. Shows the IP address of the wireless board.
3. Shows the SSID (Host Name) of the wireless board.
4. Shows the passcode.
The following items only appear on touch-applicable models.
5. Show a list of the connected computers.
6. You can change the language used in the wireless board screen.
You can enable starting of the connection software from a commercially available USB flash drive. (See page 32.)
7. Specify whether or not a screen is displayed on the monitor by computer operation. The selection changes each time you
touch this.
: Prohibit screen display by operation from another computer
: Allow screen display by operation from another computer
8. You can display the screens of up to 4 computers at once.
9. Displays the whiteboard (Direct Drawing) screen. *
* This icon will be added when the wireless board firmware is updated. (See page 31.)
Wireless mode screen
3
2
9
4
5
6
7
8
15
E
Advertisement
Table of Contents
