Connect The Computer To The Wireless Board - Sharp PN-ZB03W Operation Manual

Connect the computer to the wireless board

Directly connect the computer to the wireless board.
When using a different method, connection is necessary as well to change the settings from the factory default settings.
In addition, read your computer's manual.
TIPS
• The factory default setting for the wireless board's wireless LAN is 2.4 GHz.
n Windows
1. Click on the taskbar.
2. Select the wireless board from the wireless network list.
The SSID of the wireless board is shown in the home screen of Wireless mode.
Caution
• The factory default setting for wireless LAN security is not enabled.
For security, set "Encryption" (encryption method) and a "Key". (See page 11.)
9
E