Note:
10 minutes after the charging process has finished, the appliance will
switch off automatically.
5) Pull the mains adapter from the mains power socket and disconnect the
USB charging cable w from the appliance.
Before first use
Preparing the appliance
1) Charge the battery as described in the section Charging the integrated
battery.
2) We recommend cleaning the appliance and the attachments 9 - q as
described in the section Cleaning and care before using them for the
first time. This will remove any residues left from the production process.
The appliance is now ready for use.
Checking compatibility
■
We recommend first testing the appliance in a less sensitive area. Check
how your skin reacts, for example, by testing it on the inside of your lower
arm. First read the section Handling and operation so that you know
how to use the appliance safely and avoid injuries.
■
Clean the skin and make sure that no cream or moisturizer has been
applied to the area.
■
Only continue with the application on your face if no skin reactions
appear on the test area after about 30 minutes.
■
In case of doubt, consult your physician to determine if the treatment is
suitable for you.
│
GB │ IE
■
12
SPR 600 A1