Fitting An Attachment With Filter; Intensity Levels - Silvercrest SPR 600 A1 Operating Instructions Manual

Fitting an attachment with filter

Intensity levels

You can choose between 3 intensity levels.
The symbols
on the selected intensity level.
Intensity level
"Soft"
"Normal"
"Strong"
│ GB │ IE
■ 14
in the LED display 6 light up at different speeds depending
Function
Light suction
Moderate suction
Strong suction
1) If already fitted: remove the fitted attach-
ment 9 - q from the suction head 2.
2) To change the filter 8, pull the current
filter 8 out of the suction channel of the
attachment 9 - q. Use tweezers, if
necessary.
3) Insert a filter 8 into the suction channel
of the selected attachment 9 - q.
4) Fit the attachment 9 - q onto the suction
head 2 so that the small rectangular tab
on the lower part of the suction head 2
engages precisely into the matching
recess in the suction channel of the
attachment 9 - q.
5) Shake the appliance lightly if the filter 8
has slipped into the suction channel. The
filter 8 must be resting directly on the
suction head 2 for the appliance to
function properly.
Speed of symbols
Slow
Medium
Fast
SPR 600 A1