Working With The Appliance - Silvercrest 344949 2004 Operating Instructions Manual

■ Hardened skin remover
For large-scale and rapid removal of thick hardened skin or
calluses on the sole or heel of your foot.
♦ Guide the hardened skin remover
and heel to be treated while exerting gentle pressure.

Working with the appliance

WARNING! RISK OF INJURY!
Excessively long or intensive treatment can also
injure deeper layers of skin.
► Therefore, check the treatment progress and results regularly.
Diabetics in particular are less sensitive on their hands and feet.
NOTE
► The attachments do not have as much effect on softened skin.
Therefore, do not carry out any pretreatment in a water bath
before using the appliance.
1) Find a well-lit place to work. There must be a mains power outlet
in close proximity.
2) Insert the appropriate attachment for your purpose in the attach-
ment fitting
3) Attach the connector plug
connector socket
4) Plug the mains adapter
5) Always start the treatment at slow speed and only increase it
when necessary. Press the
If you want to reduce the speed, press the
│ GB │ IE │ NI │ CY
■ 14
:
16
. The attachment must sit securely.
9
of the hand element
6
into a mains power outlet.
8
button
over the parts of the sole
16
of the mains adapter
.
7
to increase the speed.
2
to the
8
button .
3
SMPS 7 D2