Select Saved Stations; Sleep Timer - Silvercrest SSRM 10 A1 Manual

Select saved stations

 To select a previously saved station, briefly press the
"MEM/AL" button (7) and use the "-" button (2) or "+" button
(4) to select a preset between 01 and 20.
 After approx. 3 seconds, the station that is saved in the
selected preset is played automatically.
Preset stations are lost when batteries are changed.

SLEEP timer

With the SLEEP timer, you can set a time between 10 and 90
minutes after which your scan radio automatically switches off.
The setting is made in intervals of 10 minutes. Proceed as follows:
 Switch off the scan radio with the "On/Standby" button (6).
 Keep the "On/Standby" button (6) pressed until the display
(1) indicates the number 90 (for 90 minutes).
 Then press the "On/Standby" button (6) repeatedly until you
reach the desired number of minutes (for example, 40). Each
time you press the "On/Standby" button (6), the number of
minutes to switching off is reduced by 10 minutes.
 The scan radio then switches itself on and, after the previously
selected minutes (for example, 40), it switches itself off
automatically.
 The display (1) indicates "SLEEP" (20) when the SLEEP timer is
activated.
SilverCrest SSRM 10 A1
English - 19