Using Rotation - LG Aerotower lite FS15GP Series Owner's Manual

26 USING

Using Rotation

Sets the rotation of the air purifier.
Press the Standby On/Off button to turn the
1
product on.
Press the Rotation button to set the rotation
2
angle.
• When you press the button during product
operation, the rotation angle will change in
the order of 45º → 60º → 90º → 140º →
Stop(OF).
NOTE
• When you operate the product for the first time,
it resets its position while rotating at an angle of
140º and then rotation will start at the center of
the product.
• If you change the function while using rotation
mode, the rotation will stop for a while so that
you can check the status display, and then
the rotation will start again after the setting is
completed.
• If you turn off the product while using rotation
mode, the product will rotate to its center and
then stop.
• The product rotates based on the center of the
product. For the center of the product, refer to
Exploring the Appearance of the Product on
Overview.
• Do not hold the product and rotate it forcibly.
– If you have rotated the product forcibly,
realign the center of the product.
• To align its center, disconnect the power
plug after turning the product off, wait, then
connect the power plug again. Then, when you
rotate the product, its center will be initialized
automatically.
• When you rotate the product for the first time,
noise may occur.
– After the product rotates once, the product
will operate normally.
SG