When Installing The Product - LG Aerotower lite FS15GP Series Owner's Manual

• Do not damage the power plug or the power cord. Do not damage, extend, place near high temperatures,
excessively bend, twist, place heavy objects on top of, or tie a knot in the power cord.
• Do not connect the power plug to a multi-outlet (attached type), a plug adapter, or other accessories
without a grounding cable.
• Do not press the power plug on the back of the product or plug it in backwards.
• Remove the power plug from the power outlet when cleaning the product or replacing the product filter.
• Do not repeatedly connect and disconnect the power plug.
• Do not disconnect the power plug during operation.
Compliance
• When installing a new product, use a newly purchased multi-tap if possible, and periodically check the
condition of the wire sheath and plug connection.
• If there is moisture or dust on the power plug, remove it completely and then plug into the outlet firmly.
• When pulling out the power plug from an outlet, hold the power plug, not the power cord.
• Disconnect the power plug during thunderstorms or lightning or when not using the product for an
extended period.
• Do not allow your pet animals to nibble the power cord.
• If water penetrates into electrical parts inside the product, disconnect the power plug and contact an LG
Electronics Customer Information Center.
• If the power cord or power plug is damaged, or the holes in the power socket are loose, stop using the
product immediately and contact an LG Electronics Customer Information Center.

When Installing the Product

Prohibitions
• Do not install the product in the following places:
– Places exposed to water or rainwater, or places where there is high humidity;
– Places with a lot of dust or extreme temperature changes (outdoors, vinyl greenhouses, etc.);
– Places with flammable gas leaks or with a lot of industrial oil or metallic dust present;
– A place with an uneven or inclined floor;
– On top of a mat or a blanket; or
– Places under direct sunlight or where there are heating appliances.
• The product should not be disassembled, repaired, or modified unless the work is done by a service
engineer from an LG Electronics Customer Information Center.
• Do not allow the product or power cord to come into contact with any hot surface.
Compliance
SAFETY INSTRUCTION 05
SG